- Select Lens (only when Auto Lens Select is off)
- DCS Zoom test: 11-110mm (1)
- Camera index (only in SD mode)
- Project FPS (only in SD mode)
- 23.98
- 24 (default)
- 25
- 29.97
- 30
- Auto lens select (this tells the LDT what lens is loaded from the preston)
- Off (default) (use this if the focus puller is not using F-Mapping)
- On (use this if the focus puller is using F-Mapping)
- Circle of conf. (only used for calculating the Depth of Field)
- 0.013 (default)
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- SD card, Film (default)
- SD card, MDR
- SD card, RED
- SD card, Komodo
- SD card, Venice
- SD card, MiniLF
- SD card, Alexa
- RED, Element tech.
- RED, RCP2
- DXL, Element tech.
- Cooke /i
- Venice 12pin
- Virtual Production
- File format (only in SD mode)
- CSV - ASCII (default)
- DCS - Binary
- 2200-2500 MHz (default 2405)
- Off (default)
- DCS Out
- Element Technica
- Cooke/i
- MDR LOOP (default)
- DCS IN/OUT
- DCS IN
- User Defined (default 192.168.1.200)
- User defined (default 33322)
- User Defined (default 192.168.1.100)
- User Defined (default 192.168.1.1)
- User Defined (default 255.255.255.0)
- User Defined (default 192.168.0.100)
- User Defined (default 192.168.0.102)
- User Defined (default 0.0.0.0)
- User Defined (default 255.255.255.0)
- User Defined (default 192.168.2.50)
- User Defined (default 192.168.2.1)
- User Defined (default 0.0.0.0)
- User Defined (default 255.255.255.0)
- Local table (default) (for normal operation)
- Pull from Remote (special operation only. Only choose this option if instructed to do so by a member of the DCS team)
- Pull from Lens (take lens data from smart lens)
- Pull from LDT-A2/M2 (Used in conjunction with the LDT-A2 or LDT-M2 for lens data)
- Pull from LCUBE
- Pull from Nucleus-M
- Pull from Camin
- Pull from DXL cmotion
- Format SD Card
- Factory Defaults
- DCS Protocol
- MDR F (default)
- MDR I
- MDR Z
- MDR AUX
- MDR F
- MDR I (default)
- MDR Z
- MDR AUX
- MDR F
- MDR I
- MDR Z (default)
- MDR AUX
- Add Lens
- Edit Lens
- Delete Lens
- Save Config
- Browse clips
- Info