DCS’ LDT-E1 is a lens encoder designed to be used with the LDT-A2, LDT-M series and LDT-R2. It connects using interchangeable cogs, to either the Focus, Iris or Zoom rings of a lens and sends this information to the LDT.
LDT-E1 can be used on its own or at the same time with other axis information when the LDT is connected to a follow focus system.
|1||ENC Port||6 Pin 0B Lemo|
|2||Switch||Select between focus, Iris and zoom|
|3||Cog 60t||For standard cine lenses focus/iris/zoom, Panavision focus only|
|4||Cog 90t||For Panavision iris, Fujinon ENG iris, Canon ENG iris|
|5||Cog 120t||For Panavision zoom|
|6||Rosset||For mounting the LDT-E1|
|7||Bracket||For mounting the LDT-E1|
|Output||6 Pin 0B Lemo||Lens Data Encoder to LDT port||ENC, LDE|
All DCS cables are categorized using a code and a bend relief color for each of the cable types. Cables have one default length; 24 inches and the connector type can be straight (S), right angle (R), or anglissimo (O). Custom cables can be made upon request.
|Code||Bend Relief Color||Type||Description|
|ENC||Green||6 pin 0B Lemo to 6 pin 0B Lemo||ENC cable connects the LDT-E1 to the LDT-A2, LDT-M2 and LDT-R2|
|LDE||Green||12-pin S103 Fischer to 6-pin 0B Lemo||LDE cable connects the LDT-E1 to the LDT-M1|
The LDT-E1 is plug and play, and does not require additional or separate lens tables to work.
Using the switch on the LDT-E1, select which axis you want to bound the device to.
The LDT-E1 can also be used to send focus or iris data to the LDTs if required. Simply rig the encoder on the desired axis and change the physical button to that axis.
When connected to the LDT-M1, the LDT-E1 can only provide zoom data. In this instance the physical switch does nothing.
To calibrate the LDT-E1, press the calibrate button on the LDT for two seconds. Then rotate the desired axis from one extreme to the other pausing for one second at each end.
To calibrate the LDT-E1:
On the LDT-R2 choose:
Menu > Calibrate
Then rotate the desired axis from one extreme to the other pausing for one second at each end.
If for rigging purposes the lens encoder need to be reversed:
Menu > Motor directionand select
Reverseon the appropriate axis.
WRS select the desired axisand change to Right or Left
Menu > ECS > LBUS Lens Motor Configand select Right or Left on the appropriate axis.